home

Get the things you need in as soon as 1 hour.

Order everything from groceries to household essentials for delivery to your door.

universal product cart
slide 1 of 2, 3M Command Waterresistant Adhesive Strips Medium/Large, 6 ct
slide 2 of 2, 3M Command Waterresistant Adhesive Strips Medium/Large, 6 ct
3M

3M Command Waterresistant Adhesive Strips Medium/Large

To Apply: 1. Select location. If possible, choose a location where strips are not over grout lines. Important: Allow space above hook for removal. 2. Clean & dry surface. Clean surface with isopropyl rubbing alcohol, let dry. Do not use household cleaners to prep the surface. Separate strips. 3. Remove red liner. Press adhesive to mounting base of hook. 4. Remove black liner. Press hook to surface for 10 seconds. 6. Important: For maximum holding strength slide hook off. 6. Press base firmly for 30 seconds. 7. Slide hook on to mounting base. 8. Wait 1 hour before use. To Remove: 1. Slide hook up to remove from mounting base. 2. Never pull strip towards you. Strip could break or damage surface if pulled outward. 3. Hold base gently to prevent base from snapping fingers. Do not press base against wall. 4. Stretch strip straight down along wall at least 12 inches for medium and 15 inches for large until base and strip release. Important: Failure to follow instructions carefully may cause damage! Save instructions for damage-free removal or visit command.com. Note: Apply to surfaces above 15 degrees F. Adhesive could lose adhesion above 125 degrees F.