home

Get the things you need in as soon as 1 hour.

Order everything from groceries to household essentials for delivery to your door.

universal product cart
slide 1 of 3, Command Damage-Free Hanging Fog Resistant Mirror, 1 ct
slide 2 of 3, Command Damage-Free Hanging Fog Resistant Mirror, 1 ct
slide 3 of 3, Command Damage-Free Hanging Fog Resistant Mirror, 1 ct
Command

Command Damage-Free Hanging Fog Resistant Mirror

Remove protective film before use. To Apply: 1. Clean surface with isopropyl rubbing alcohol, let dry. Do not use household cleaners to prep the surface. Separate strips. 2. Press fasteners until they click. 3. Remove one green liner. Position one set of strips on back of mirror, in rectangular zone. Removing remaining green liners. 4. Position mirror on wall. Important: Press each set firmly for 30 seconds to reach maximum holding power. Wait 1 hour before use. Tips: Do not use household cleaners to clean the mirror surface. To Remove: 1. Grab bottom corners and remove mirror as shown. 2. Never pull strip towards you. Strip could break or damage surface if pulled outward. 3. Lightly press top of strip and grab tab. Stretch slowly across the wall. 4. Continue stretching at least 12 inches (30 cm) or until strip releases from wall. Repeat for second strip. Important: Failure to follow instructions carefully may cause damage! Save instructions for damage-free removal or visit command.com. Note: Apply to surfaces above 15 degrees F (-10 degrees C). Adhesive could lose adhesion above 125 degrees F (50 degrees C). Mirror can be reused with medium Command picture hanging strips.