Formula 409 Carpet Spot & Stain Remover

Before Cleaning: Test for colorfastness on a hidden section of carpet. Remove loose dirt from the area to be cleaned. For wet spills or stains, blot area with a clean, absorbent cloth. Some stains will cause permanent discoloration even after cleaning. Spot and stain cleaning. 1. Shake can well and generously apply Formula 409 Carpet Spot & Stain Remover directly to stain from a distance of 4 to 6 inches. Allow foam to absorb into stain for 3 minutes. 2. Gently rub or blot area with an absorbent, dry cloth. Repeat steps 1 and 2 as needed. 3. Allow to dry completely and then vacuum. Deep-Cleaning for Larger Areas: 1. Shake well before and during use. Hold can upside down about 2 feet above carpet. Spray lightly and evenly over a 3-foot-square area using a side-to-side sweeping motion. 2. With a damp mop or sponge, rub into carpet using a crisscross sweeping motion. 3. Continue working across the carpet until entire area is cleaned. Let dry, then vacuum loosened dirt. Self-Cleaning: 1. Shake can well before and during use. Hold can upside down about 2 feet above carpet. Spray lightly and evenly using a side-to-side sweeping motion. 2. Allow approximately 15 minutes for foam to dry and to lift dirt. When dry, vacuum thoroughly. For best results, use vacuum cleaner at top suction with a fresh empty bag. Disposal: Offer empty container for recycling. If recycling is not available, discard container in trash.